You can fully operate and control a computer or server, and your USB peripherals from as far away as 1/4 mile using 50/125 µ multi-mode fiber. The CrystalView DVI Plus supports all combinations of DVI-D monitors, video cards, and USB 2.0 transparent devices.

ADDERlink X-USB PRO-US Extender, Remote and Local Boxes, Stand-Alone
Unit of Measure

Physical Dimension

Local Height

N/A 1.02 in

Local Width

N/A 2.95 in

Local Depth

N/A 6.38 in

Local Weight

N/A 0.77 lb

Remote Height

N/A 1.02 in

Remote Width

N/A 2.95 in

Remote Depth

N/A 4.80 in

Remote Weight

N/A 0.95 lb

Environmental

Storage Non-Condensing Relative Humidity

N/A 10 to 80 %

Operating Temperature

N/A 0 to 40 ºC32 to 104 ºF

Storage Temperature

N/A -25 to 60 ºC-13 to 140 ºF

Electrical

Alternating Current (AC) Voltage

N/A 100 to 240 V

Frequency

N/A 50 to 60 Hz

Signals Support

Keyboard

N/A USB
Pointing Device1 N/A USB

Video (Non-Interlaced Only)

N/A 1920 x 1200 at 60Hz

Note for Signals Support

N/A Does not support Touchscreen interface.

Connections

From Local Computer

N/A As supplied on remote enclosure

To Remote Peripherals

N/A Remote 5563
(4) USB Type A Connector
(1) 15-pin High-Density D-type Female Connector
(2) 3.5mm Audio Jack RJ45
(1) 2.5mm DC Jack for optional power adapter (only required for video only application)

Remote 5562
As supplied on remote enclosure

Options

Accessories

N/A 9565 - 50 ft Prefab Category 5 Cable 9566 - 100 ft Prefab Category 5 Cable 9567 - 150 ft Prefab Category 5 Cable 9568 - 200 ft Prefab Category 5 Cable 9569 - 250 ft Prefab Category 5 Cable 9570 - 300 ft Prefab Category 5 Cable 9571 - 350 ft Prefab Category 5 Cable 9572 - 400 ft Prefab Category 5 Cable 9575 - 1000 ft Prefab Category 5 Cable P070-000500 - Local Video Splitter Cable

Additional Information

Additional Information

N/A ADDERlink X-USBPRO-US Extender for Video, Keyboard, & Pointing Device up to 1000 ft. at 1920 x 1200 (60 Hz Refresh), Software Independent. For use with LCD Flat Panel Displays. For use as a stand-alone item. Only available with a USB connection, supports the use of a USB touchscreen.

Note

Note

N/A A common sense solution for saving money

Instead of paying for a second computer and another software license to put process control on your plant floor, wouldn't it make more sense to be able to operate one computer from both the control room and the plant floor?

That's exactly the idea behind the Daisy extender system. One computer, two monitors, two keyboards and two pointing devices and the remote peripherals can be up to 1000 feet away!

And it has never been simpler. Control over both keyboard and pointing device is switched to your location JUST BY STARTING TO WORK at that station. You can even configure the system to provide lock-out control of switching locations.

The Daisy 5560 Series an economical solution for plant floor process control.
  • 1 User Configurable